Merging Verts, No Solid Extrusion

[Hometime]

I've had a problem with this since installing PN 5.0.
I cannot get a solid extrusion after merging the end vertices on a drawn PSketch.
See attached Flash video.
Don

[Olaf Finkbeiner]

Hi Hometime,
you should install the latest update! The problem is not the merging of the verts but that it is only one vert. Try a shape with two verts and it will work even in your version....

greetings

Olaf

[Hometime]

Olaf,
1)What is the latest version?
2) This is not just one vert, it is two. as in the video.

Don

[PiXeL_MoNKeY]

Go to the download page for the customer or demo versions. You will find the latest version there. Your issue was fixed in version 5.10, I believe.

-Eric

[Hometime]

Great, I ran the 5.1 installer and now I have duplicate path errors.
I hate computers and software!
I'll try to fix it when I cool off.
Don

[PiXeL_MoNKeY]

That was a known problem with 5.10, see my post here (http://www.npowersoftware.com/forums/showpost.php?p=3488&postcount=14) for a fix.

-Eric

[Hometime]

Thanks, Eric.
Seems fine now, I removed the original NPower folder with the older files in it and left the new Power Solids folder with the new files in it.
The original problem also seems to be solved.
Thanks guys!
Don

[nPower_Dave]

Great, I ran the 5.1 installer and now I have duplicate path errors.
I hate computers and software!
I'll try to fix it when I cool off.
Don

Hi Don,

If you first uninstall, then you won't get the duplicate path errors. At this point, uninstall, and make sure that you remove all instances of BrepObject.dlo and BrepBonus.dlo from your machine. Then you can install without problems.

[Hometime]

Hi Dave,
It seemed fine but I did as you instructed and it runs fine still.
Thank you,
Don